Explore control input cable kit can connect either a switch input or DMX controller to the Explore E6 & E7 lights. Kit includes a 5m control input cable and terminator.
PHYSICAL:
Cable Length 5m (164)
TECHNICAL:
Cable Specification:
- Tinned Copper: 1x Twisted Pair 24 AWG 2x 20 AWG + Foilscreen + Drain 5.5mm OD
- Connector (End 1): 5-way IP67 Plug
- Connector (End 2): Bare End - for own connection to switch or DMX controller
- Terminator Connector: 5-way IP67 Plug
SIGNAL CABLE COLOUR:
- Shield: Shield
- GND: Black
- DMX +: Yellow
- DMX -: Brown
- Switch: Red
CONTENTS:
5m Control Input Cable & Terminator
PART NUMBERS:
Explore E6 & E7 Control Input & Terminator Kit 012923
COMPATIBLE PRODUCTS:
Explore Series E6, E7
PHYSICAL:
Cable Length 5m (164)
TECHNICAL:
Cable Specification:
- Tinned Copper: 1x Twisted Pair 24 AWG 2x 20 AWG + Foilscreen + Drain 5.5mm OD
- Connector (End 1): 5-way IP67 Plug
- Connector (End 2): Bare End - for own connection to switch or DMX controller
- Terminator Connector: 5-way IP67 Plug
SIGNAL CABLE COLOUR:
- Shield: Shield
- GND: Black
- DMX +: Yellow
- DMX -: Brown
- Switch: Red
CONTENTS:
5m Control Input Cable & Terminator
PART NUMBERS:
Explore E6 & E7 Control Input & Terminator Kit 012923
COMPATIBLE PRODUCTS:
Explore Series E6, E7