Restraint System Support Boat covers
This system will extend the life of your boat cover. Easy to install and adjust, prevents
accumulation of water and dirt in the center of the canvas. The kit includes a telescopic pole
aluminum (50 cm to 116 cm) which is positioned in the center with broad support in the
polypropylene top and straps that are placed fore and aft. This equipment is valid
for all cases to 7m
Installation Instructions
1. Place the center of the strap on the bow of the boat. Guards were positioned to
that the strap does not directly contact the edges of the boat.
2. Pull the straps on the boat balanced
3. Weaving straps on the stand in a triangular top and bottom so that
straps remain above soprte
4. Insert the stick in the triangular piece of that and lift the club to the highest position
desired. Turn of the sections of the stick to tighten or loosen.
5. Attach the ends of the straps on the trailer
6. Adjust the straps so they are square and the stick is vertical.
7. Carefully place the cover over the straps without knocking down the stick. The stick can
need some height adjustment according to the shape and size of your boat and cover.
This system will extend the life of your boat cover. Easy to install and adjust, prevents
accumulation of water and dirt in the center of the canvas. The kit includes a telescopic pole
aluminum (50 cm to 116 cm) which is positioned in the center with broad support in the
polypropylene top and straps that are placed fore and aft. This equipment is valid
for all cases to 7m
Installation Instructions
1. Place the center of the strap on the bow of the boat. Guards were positioned to
that the strap does not directly contact the edges of the boat.
2. Pull the straps on the boat balanced
3. Weaving straps on the stand in a triangular top and bottom so that
straps remain above soprte
4. Insert the stick in the triangular piece of that and lift the club to the highest position
desired. Turn of the sections of the stick to tighten or loosen.
5. Attach the ends of the straps on the trailer
6. Adjust the straps so they are square and the stick is vertical.
7. Carefully place the cover over the straps without knocking down the stick. The stick can
need some height adjustment according to the shape and size of your boat and cover.