Hydraulic Oil HLP 46 1L Liqui Moly

High-performance hydraulic oil based on high-quality, refined
. Thanks to the high
thermal stability of the base oils, the ageing process
is significantly slowed down, even at
high temperatures. This makes a decisive contribution to reducing sludge formation and increasing the cleanliness and reliability of hydraulic systems
. Its
high oxidation resistance allows long oil change intervals. The excellent
anti-wear technology is effective at both low and high load conditions
. Good corrosion protection
even in the presence of water. Thus, all
hydraulic components receive optimum protection
under all operating conditions.
For stationary and mobile use in hydraulic systems
of construction,
forestry and agricultural machinery such as excavators, tractors, etc.,
lifts, industrial machinery and machine tools
, wood splitters, lifting equipment
and presses, etc. Thanks to the good compatibility of
materials, this hydraulic oil from LIQUI MOLY can be
used in the most common pump systems
in hydraulic systems. In addition,
this hydraulic oil can be used with all
sealing materials and paints that are compatible with
mineral oil.
Approvals
Hydrauliköl DIN 51524 Teil 2 HLP 46
Technical data
ISO VG VG 46
DIN 51519
Density at 15 °C 0.86 g/cm³
DIN 51757
Viscosity at 40 °C 46 mm²/s
DIN 51562
Viscosity at 100 °C 6, 75 mm²/s
DIN 51562
Viscosity index 100
DIN ISO 2909
Pour point -27 °C
DIN ISO 3016
Flash point 232 °C
DIN ISO 2592
Release power
at 54 °C
<= 30 min
DIN ISO 6614
Foam behaviour
at 24 °C
30/0 ml
ISO 6247
Foam behaviour
at 93,5 °C
50/0 ml
ISO 6247
Technical data
Behaviour of
foam at 24 °C after
of 93.5 °C
30/0 ml
ISO 6247
Separating property of
air
<= 10 min
DIN ISO 9120
Corrosive effect on steel 0-B
DIN ISO 7120
Corrosive effect on copper 1-125 A3
DIN EN ISO 2160
Neutralisation index 0, 5 mg KOH/g
DIN 51558 T1
Neutralisation index
after 1000 h
< 2 mg KOH/g
DIN 51587
Oxide ashes 0,16 g/100g
DIN EN ISO 6245
Sulphate ashes 0,17 g/100g
DIN 51575
Short test of
FZG gears, test
normal A/8, 3/90
Schadenskraftstufe >10,
Spez. Gew.Änderung
<0,27 mg/KWh
DIN 51354
Colour number (ASTM) L1,5
DIN ISO 2049
Purity class 19/17/14
ISO 4406