Smartsolar mppt charger 250v/60a-mc-4 victron

Solar chargers collect energy from your solar panels and store it in your batteries. Using the latest and fastest technology, the SmartSolar MPPT 100/15 maximizes this energy harvest, intelligently managing it to reach the maximum load in the shortest time possible. The SmartSolar takes care of the health of the battery, extending its useful life.

Battery voltage: 12 / 24V automatic selection.
Rated load current: 60A.
Nominal PV power, 12V: 860W.
Nominal PV power, 24V: 1720W.
Nominal PV power, 48V: 3440W.
Maximum short circuit current: 35A.
Maximum PV open circuit voltage: 100V.
Maximum efficiency: 99%.
Self-consumption: 12V: 25 mA / 24V: 15 mA.
"Absorption" charging voltage: Default values: 14.4 / 28.8 / 43.2 / 57.6V.
"Float" charge voltage: Default values: 13.8 / 27.6 / 41.4 / 55.2V.
Charging algorithm: multiphase adaptive.
Temperature compensation: -16 mV / ° C, -32 mV / ° C resp.
Low voltage charge reconnection: 13.1V / 26.2V or 14V / 28V or BatteryLife algorithm.
Protection: Reverse polarity of the battery (fuse). Output short circuit. Overtemperature
Working temperature: -30 to +60 ° C (full nominal power up to 40 ° C).
Humidity: 95%, non-condensing.
Maximum working height: 5,000 m (full nominal power up to 2,000 m).
Environmental conditions: Indoor, not conditioned.
Data communication port: VE.Direct or Bluetooth.
Remote on / off switch: Yes (two-phase connector).
Programmable Relay: DPST Nominal Capacity AC 240 V AC /
4 A DC rating 4A up to 35VDC, 1A up to 60VDC
Parallel operation: Yes (not synchronized).