KENT Rotabond MS is SMP suitable for making elastic constructive joints and elastic sealing. It is a product which has performance of an adhesive and sealant-
Features
- Solvent, isocyanate and PVC free safe to use
- Very good UV resistance long lasting
- Primerless application time saving
- Permanently elastic will not shrink, crack or harden
- Neutral, odorless and fast curing easy to use
- Paintable after skin forming
Benefits
- Safe to use
- Long lasting
- Time saving
- Will not shrink, crack or harden
- Easy to use
- Time saving
Applications
Rotabond MS adheres well without primer on clean, dry, dust and grease free substrates of aluminum, stainless steel, galvanized steel, zinc, copper, brass, powder coated metal, most lacquered metal surfaces, glass, PVC, polyesters (GRP), painted and lacquered wood etc
Elastic bonding and sealing
Bonding of roofs
Bonding of corner profiles of aluminum or polyester
Bonding of polyester parts on metal frames
Bonding of floor systems
Sealing welded seams
At a temperature of 20°C and a relative humidity of 50%, Rotabond MS can be over-painted 10 minutes after application.
Instructions
Clean surface with Soft Surface Cleaner (Ref.: ET206) and allow to dry.
Apply Rotabond MS as required. Paint, if required, immediately after application or when skin has formed ( approximately 30 minutes dependent on ambient temperature and humidity).
Rotabond MS can easily be extruded with a hand or air pressure gun at temperatures between +5 and +35°C.
Features
- Solvent, isocyanate and PVC free safe to use
- Very good UV resistance long lasting
- Primerless application time saving
- Permanently elastic will not shrink, crack or harden
- Neutral, odorless and fast curing easy to use
- Paintable after skin forming
Benefits
- Safe to use
- Long lasting
- Time saving
- Will not shrink, crack or harden
- Easy to use
- Time saving
Applications
Rotabond MS adheres well without primer on clean, dry, dust and grease free substrates of aluminum, stainless steel, galvanized steel, zinc, copper, brass, powder coated metal, most lacquered metal surfaces, glass, PVC, polyesters (GRP), painted and lacquered wood etc
Elastic bonding and sealing
Bonding of roofs
Bonding of corner profiles of aluminum or polyester
Bonding of polyester parts on metal frames
Bonding of floor systems
Sealing welded seams
At a temperature of 20°C and a relative humidity of 50%, Rotabond MS can be over-painted 10 minutes after application.
Instructions
Clean surface with Soft Surface Cleaner (Ref.: ET206) and allow to dry.
Apply Rotabond MS as required. Paint, if required, immediately after application or when skin has formed ( approximately 30 minutes dependent on ambient temperature and humidity).
Rotabond MS can easily be extruded with a hand or air pressure gun at temperatures between +5 and +35°C.