Skylla-i charger 24v/100a (3) 230v victron

Dimensions 402x250x140 mm. Weight 8 kg.

A modern and powerful battery charger that withstands the rigors of the harshest environments: heat, humidity and salt air.
- The correct amount of charge for a lead-acid battery: variable absorption time.
- BatterySafe mode: avoids damage caused by excess gassing.
- Storage mode: less aging and need for maintenance when the battery is not in use.
- Smaller and lighter compared to similar models.
- NMEA2000 Canbus connection.
- PowerControl: sets the maximum power coming from the electrical network.
- Remote control.
- Prepared for Li-Ion (LiFePo4).

Input voltage (VAC): 230 V.
Input voltage range (Vdc): 185-265 V.
Input voltage range (VCC): 180-350 V.
Maximum input AC current 180 VAC: 20 A.
Frequency (Hz): 45-65 Hz.
Power factor: 0.98.
'Absorption' charging voltage (VCC): 28.8 V.
'Float' charging voltage (VCC): 27.6 V.
'Storage' charging voltage (VCC): 26.4 V.
Charge current (A): 100 A.
Starter Battery Charge Current (A): 4.
Charging algorithm: 7-stage variable.
Battery capacity (Ah): 500-1000 Ah.
Li-Ion charging algorithm: 3 stages, with on-off control or CAN bus control.
Temperature sensor: Yes.
Can be used as a power supply: Yes.
Remote On / Off Port: Yes (can connect to a Li-Ion BMS)
Protection: Reverse polarity of the battery (fuse in the battery cable). Output short circuit. Overheating
Operating temperature: -20 to 60 ° C (full power up to 40 ° C).
Humidity (non-condensing): max. 95%.