VE.Direct communication port
The VE.Direct port can be connected to:
A computer (requires VE.Direct to USB interface cable)
Smart phone, tablets, MacBook and other Apple and Android devices.
(VE.Direct Bluetooth Smart dongle is required.)
Fully configurable:
Low battery voltage alarm trigger and reset levels.
Low battery voltage cutoff and reset levels.
Dynamic cut: load dependent cut level.
Output voltage 210 - 245V.
Frequency 50 Hz or 60 Hz.
ECO mode on / off and ECO mode detection level.
Supervision:
Input and output voltage,% load and alarms.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability for many years.
The inverters are short-circuit proof and protected against overheating, either due to overload or high ambient temperature.
High starting power.
Needed to start loads such as power converters for LED lamps, halogen lamps, or power tools.
Eco mode
In ECO mode, the inverter will switch to standby mode when the load drops below a preset value (minimum load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will stay on.
Remote on / off
A remote on / off switch can be connected to a two-pole connector, or between the battery plus and the left-hand contact of the two-pole connector.
Diagnostic LED
See manual for description.
To transfer the load to another AC source: the automatic transfer switch.
For our low power inverters, we recommend our Filax automatic transfer switch. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.
The VE.Direct port can be connected to:
A computer (requires VE.Direct to USB interface cable)
Smart phone, tablets, MacBook and other Apple and Android devices.
(VE.Direct Bluetooth Smart dongle is required.)
Fully configurable:
Low battery voltage alarm trigger and reset levels.
Low battery voltage cutoff and reset levels.
Dynamic cut: load dependent cut level.
Output voltage 210 - 245V.
Frequency 50 Hz or 60 Hz.
ECO mode on / off and ECO mode detection level.
Supervision:
Input and output voltage,% load and alarms.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability for many years.
The inverters are short-circuit proof and protected against overheating, either due to overload or high ambient temperature.
High starting power.
Needed to start loads such as power converters for LED lamps, halogen lamps, or power tools.
Eco mode
In ECO mode, the inverter will switch to standby mode when the load drops below a preset value (minimum load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will stay on.
Remote on / off
A remote on / off switch can be connected to a two-pole connector, or between the battery plus and the left-hand contact of the two-pole connector.
Diagnostic LED
See manual for description.
To transfer the load to another AC source: the automatic transfer switch.
For our low power inverters, we recommend our Filax automatic transfer switch. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.